TS jacks, cylinders and hydraulic tools.

Cylinders to 100 tonnes, toe jacks to 50 tonnes and 700 bar hand pumps, with the valves, gauges and hoses that connect them.

Hand pump

A manual hydraulic pump for driving high-tonnage cylinders where no power supply is available.

Part number	Pressure	Displacement	Enquire
TS-HP-CP-700B	700 bar	2.3 cc	Enquire

A standard hydraulic cylinder for lifting, pushing and pressing.

Part number	Capacity	Stroke	Enquire
TS-RSC-30100	30 t	100 mm	Enquire

The lock nut holds the load mechanically once the ram is up, so the load does not rely on hydraulic pressure alone.

Part number	Capacity	Stroke	Closed height	Enquire
TS-CLL-1050	10 t	50 mm	103 mm	Enquire
TS-CLL-10100	10 t	100 mm	150 mm	Enquire
TS-CLL-10150	10 t	150 mm	200 mm	Enquire
TS-CLL-2050	20 t	50 mm	105 mm	Enquire
TS-CLL-20100	20 t	100 mm	155 mm	Enquire
TS-CLL-20150	20 t	150 mm	205 mm	Enquire
TS-CLL-3050	30 t	50 mm	110 mm	Enquire
TS-CLL-30100	30 t	100 mm	160 mm	Enquire
TS-CLL-30150	30 t	150 mm	210 mm	Enquire
TS-CLL-50100	50 t	100 mm	165 mm	Enquire
TS-CLL-50150	50 t	150 mm	215 mm	Enquire
TS-CLL-100100	100 t	100 mm	180 mm	Enquire
TS-CLL-100150	100 t	150 mm	232 mm	Enquire

Telescopic stages give a long stroke from a short closed height.

Part number	Capacity	Stroke	Closed height	Enquire
TS-DFPY-50L	50 t	300 mm	165 mm	Enquire

The centre hole lets a rod or bar pass through, for pulling, tensioning and pressing jobs.

Part number	Capacity	Stroke	Details	Enquire
TS-RCH-20100	20 t	100 mm	28 mm bore, 202 mm closed	Enquire
TS-RCH-6050	60 t	50 mm		Enquire
TS-RCH-60100	60 t	100 mm		Enquire
TS-RCH-10075	100 t	75 mm		Enquire

A lighter body that is easier to carry and position by hand.

Part number	Capacity	Stroke	Closed height	Enquire
TS-RAS-50100	50 t	100 mm	232 mm	Enquire
TS-RAS-100150	100 t	150 mm	232 mm	Enquire

For tight spaces where a standard cylinder will not fit.

Part number	Capacity	Stroke	Height	Enquire
TS-FPY-101	10 t	11 mm	47 mm	Enquire

The low toe gets under machines and structures with very little clearance.

Part number	Capacity	Min. hook height	Max. lifting stroke	Enquire
TS-MHC-5	5 t	16 mm	115 mm	Enquire
TS-MHC-20	20 t	25 mm	158 mm	Enquire
TS-MHC-30	30 t	30 mm	158 mm	Enquire
TS-MHC-50	50 t	50 mm	158 mm	Enquire

Bends pipe from 13 to 34 mm with 2 to 3.5 mm wall thickness. Moulds: 13, 16, 19, 22, 28 and 34 mm.

Part number	Bending range	Pipe wall	Enquire
TS-SWG-1	13 to 34 mm	2 to 3.5 mm	Enquire
TS-SWG-1J	13 to 34 mm	2 to 3.5 mm	Enquire

Pulley blocks for cable pulling and rigging. Ask us for the rated load of each model.

Part number	Pulley size	Packed size	Enquire
TS-HL-I	160 × 140 mm	28 × 22 × 18 cm	Enquire
TS-HL-IB	160 × 140 mm	36 × 25 × 22 cm	Enquire
TS-HL-III	160 × 140 mm	53 × 32 × 32 cm	Enquire
TS-HL-IIIB	160 × 140 mm	58 × 32 × 18 cm	Enquire

The parts that connect a pump to one cylinder or several.